Jiangsu BEST Environmental Protection Engineering Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Lee Kelly
  • Company Name : Jiangsu BEST Environmental Protection Engineering Co., Ltd.
  • Tel : 86-515-88582556
  • Fax : 86-515-88580229
  • Address : Jiangsu,Yancheng,FengHuang South Road, LongGang Town, High-tech Development Zone, YanCheng City, JiangSu Province
  • Country/Region : China
  • Zip : 224001

Handle Volume 59,300~133,000m3/h Filtering Area 1,235~1,850m2 Low Pressure Long Bag Cartridge Dust Catcher (ISO approved)

Handle Volume 59,300~133,000m3/h Filtering Area 1,235~1,850m2 Low Pressure Long Bag Cartridge Dust Catcher (ISO approved)
Product Detailed
Related Categories:Dust Collector
1.Model:LMC84-N 2.Handle volume:59,300~133,000m3/h 3.Filtering area:1,235~1,850m2 4.Weight:30~45T

About  JLMC84-N   Low Pressure Long Bag Cartridge Dust Catcher

         1.This product is low pressure pulse dust collector developed to satisfy large air flow flue gas cleaning on the basis of pulse injection(Jet Pulse) dust removal technology.

         2.It does not only have the advantages of stronger dust removal capability than back flushing bag house precipitator, high dust removal efficiency and low emission concentration etc., it also have the characteristics of reliability, low gas consumption and small floor area and it is specially applicable for handling of large air flow flue gas.

         3.JLMC(CDMC) series low pressure long bag pulse dust collector has been widely applied globally, it has also been popularized and used in large quantity, it has been applied to purification of normal temperature or high temperature dust gas in areas of cement, metallurgy, petrochemical industry, building material, food, machinery, carbon black, shop inside, waste incineration & kiln and recycling of powdery material.

         4. This product has integrated the advantages of two types of dust collectors, i.e., separate anti-draught and pulsating dust-clearing, it has overcome the shortcomings of insufficient dust clearing strength in separate anti-draught type and flour dust reattachment of general pulsating dust-clearing type, it can improve the dust-clearing efficiency and remarkably reduce the injection frequency.

         5.This product also uses submerged type of pulse valve, therefore, it has reduced the jetting gas supply pressure and equipment energy consumption and prolonged service life of filter bag and pulse valve, the comprehensive technological performance has been remarkably improved. 

           

        Technical parameters:  

                        Model

LMC84-6

LMC84-7

LMC84-8

LMC84-9

Treatment wind capacity (m3/h)

59300

88920

69100

105000

77000

116000

89000

133000

Filtering area (square meters)

1235

1440

1613

1850

Filter bag quantity (pcs) diameter 130X6000mm

504

588

672

756

Filtration velocity (m/min)

0.8-1.2

Resistance (Pa)

less than 1500

Entrance dust content (g/N m3 )

less thna 1000

Exit emission concentration (mg/ N m3 )

less than 50 (filter bags made in China); less than 30(filter bags made in foreign countries)

Negative pressure sustained by dust collector (Pa)

8000

Dust cleaning pressure

Pressure (Mpa)

0.2-0.4 ( diameter 1.5 inch Flood Pulse Valve used)

Compressed air

Gas consumption (m3/min)

1.5

1.5

1.5

1.5

Power consumption (KW)

6

8.5

8.5

10.5

Equipment weight (T)

30

35

40

45

       

Handle Volume 59,300~133,000m3/h Filtering Area 1,235~1,850m2 Low Pressure Long Bag Cartridge Dust Catcher (ISO approved)



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.